AirLive RS-2500 - Manual (Page 223)

22. Monitor
AirLive RS-2500 User’s Manual 218
Figure 22-28 Ping results for VPN Connection
 Traceroute
STEP 1 ﹒ Under Monitor > Diagnostic  Traceroute, the Traceroute command can be
used by the RS-2500 to send out packets to a specific address to diagnose the
quality of the traversed network. (Figure 22-29)
 In Destination IP / Domain name enter the destination address for the
packets.
 In Packet size configure the size of each packet. (40 Bytes by default)
 In Max Time-to-Live enter the maximum number of hops (30 by default)
 In Wait time, specify the duration to wait between successive pings.
(2 seconds by default)
 In Interface select the interface that the packets will originate from.
Click OK. (Figure 22-30) 
Figure 22-29 Traceroute settings