AirLive RS-2500 - Manual (Page 51)

7. Interface
AirLive RS-2500 User’s Manual 46
7.3 DMZ
 Setting DMZ Interface Address (NAT Mode)
STEP 1 ﹒ Click DMZ Interface
STEP 2 ﹒ Select NAT Mode in DMZ Interface
 Select NAT in DMZ Interface
 Enter IP Address and Netmask
STEP 3 ﹒ Select Ping, HTTP and HTTPS
STEP 4 ﹒ Click OK (Figure 7-12)
Figure 7-12 Setting DMZ Interface Address (NAT Mode) WebUI
 Setting DMZ Interface Address (Transparent Mode)
STEP 1 ﹒ Select DMZ Interface
STEP 2 ﹒ Select Transparent Mode in DMZ Interface
 Select DMZ_Transparent in DMZ Interface
STEP 3 ﹒ Select Ping, HTTP and HTTPS
STEP 4 ﹒ Click OK (Figure 7-13)
Figure 7-13 Setting DMZ Interface Address (Transparent Mode) WebUI
The Transparent Mode of DMZ setting is only available when WAN
interface is set to Static IP.