AirLive RS-2500 - Manual (Page 16)

3. Configuring the RS-2500
AirLive RS-2500 User’s Manual 10
If the following messages appear:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=2ms TTL=64
A communication link between your computer and this product has been successfully
established. Otherwise, if you get the following messages,
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
There must be something wrong in your installation procedure. You have to check the
following items in sequence:
1. Is the Ethernet cable correctly connected between this product and your computer?
Tip: The LAN LED of this product and the link LED of network card on your computer must
be lighted.
2. Is the TCP/IP environment of your computers properly configured?
Tip: If the IP address of this product is 192.168.1.1, the IP address of your computer must
be 192.168.1.X and default gateway must be 192.168.1.1.
3.3 Management Interface
The RS-2500 can be configured using one the management interfaces below:
 Web Management (HTTP): You can manage your RS-2500 by simply typing its IP
address in the web browser. We recommend using this interface for initial
configurations. To begin, simply enter RS-2500 IP address (default is 192.168.1.1) on
the web browser. The default password is “airlive”.
 Secure Web Management (HTTPS): HTTPS is also using web browser for
configuration. But all the data transactions are securely encrypted using SSL
encryption. Therefore it is safe and easy way to manage your RS-2500.