AirLive RS-2500 - Manual (Page 34)

6. Configure
29 AirLive RS-2500 User’s Manual
6.2 Date/Time
 Synchronize system clock
The administrator can configure the RS-2500’s date and time by either syncing to an
Internet Network Time Server (NTP) or by syncing to your computer’s clock.
STEP 1 ﹒ Select Enable synchronize with an Internet time Server (Figure 6-7)
STEP 2 ﹒ Click the down arrow to select the offset time from GMT.
STEP 3 ﹒ If necessary, select Enable daylight saving time setting
STEP 4 ﹒ Enter the Server IP / Name with which you want to synchronize.
STEP 5 ﹒ Set the interval time to synchronize with outside servers.
Figure 6-7 System Time Setting
Click on the Sync button and then the RS-2500’s date and time will be
synchronized to the Administrator’s PC.
The value of Set Offset hours From GMT and Server IP / Name can
be looking for from Assist.