AirLive RS-2500 User Manual
Page 44
7. Interface
39
AirLive RS-2500 User’s Manual
Balance Mode
Auto: The RS-2500 will adjust the WAN 1/2 utility rate automatically according to
the downstream/upstream of WAN. (For users who are using various download
bandwidth)
Round-Robin: The RS-2500 distributes the WAN 1/2 download bandwidth 1:1, in
other words, it selects the agent by order. (For users who are using same
download bandwidths)
By Traffic: The RS-2500 distributes the WAN 1/2 download bandwidth by
accumulative traffic
By Session: The RS-2500 distributes the WAN 1/2 download bandwidth by
saturated connections
By Packet: The RS-2500 distributes the WAN 1/2 download bandwidth by
accumulated packets and saturated connection
By Source IP: The RS-2500 distributes the WAN 1/2 connection by source IP
address, once the connection is built up, all the packets from the same source IP
will pass through the same WAN interface
By Destination IP: The RS-2500 will allocate the WAN connection corresponding
to the destination IP, once the connection is built up, all the packets to the same
destination IP will pass through the same WAN interface. The connection will be
re-assigned with WAN interface when the connections are stopped.
Connect Mode
Display the current connection mode
PPPoE (ADSL user)
Dynamic IP Address (Cable Modem User)
Static IP Address
PPTP (European User Only)
Saturated Connections
Set the number for saturation whenever session numbers reach it, the RS-2500
switches to the next agent on the list
Ping: Select this function to allow the LAN users to ping the Interface IP Address.
HTTP: Select to enable the user to enter the WebUI of RS-2500 from Interface IP.
HTTPS: Select to enable the user to enter the secure WebUI of RS-2500 from Interface
IP.
Priority
Set priority of WAN for Internet Access