AirLive RS-2500 - Manual (Page 158)

18. Policy
153 AirLive RS-2500 User’s Manual
(6) DMZ to WAN: The source IP is in DMZ network; the destination is in WAN network.
The system manager can set all the policy rules of DMZ to WAN packets in this
function
All the packets that go through RS-2500 must pass the policy
permission. Therefore, the LAN, WAN, and DMZ network have to set
the applicable policy when establish network connection.
 Define the required fields of Policy
 Source and Destination
Source IP and Destination IP is according to the RS-2500’s point of view. The
active side is the source; passive side is destination.
 Service
It is the service item that controlled by Policy. The user can choose default value
or the custom services that the system manager set in Service function.
 Action, WAN Port
Control actions to permit or reject packets that delivered between LAN network
and WAN network when pass through RS-2500 (See the chart and illustration
below).
Chart Name Illustration
Permit all WAN
network Interface
Allow the packets that correspond with policy to
be transferred by WAN1/2 Port
Permit WAN1
Allow the packets that correspond with policy to
be transferred by WAN1 Port
Permit WAN2
Allow the packets that correspond with policy to
be transferred by WAN2 Port
DENY
Reject the packets that correspond with policy
to be transferred by WAN Port
Permit VPN
Allow the VPN packets that correspond with
policy to be transferred