AirLive RS-2500 - Manual (Page 73)

12. Authentication
AirLive RS-2500 User’s Manual 68
12
12.
Authentication
By configuring the Authentication, you can control the user’s connection authority. The user
has to pass the authentication to access to Internet.
The RS-2500 configures the authentication of LAN’s user by setting account and password
to identify the privilege.
12.1 Auth Setting
Provide the Administrator the port number and valid time to setup RS-2500 authentication.
(Have to setup the Authentication first)
 Authentication Port: The port number to allow internal users to connect to the
authentication page. The port number is allowed to be changed.
 Re-Login if Idle: The function works to force internal user to login again when the idle
time is exceeded after passing the authentication. The default value is 30 minutes.
 Re-Login after user login successfully: The function works to permit user to re-login
within a period of time. The default value is 0, means unlimited.
 Deny multi-login if the auth user has login: The function works to prevent the system
had login twice per same user account.