AirLive RS-2500 - Manual (Page 12)

2. Install the RS-2500
AirLive RS-2500 User’s Manual 6
2
2.
Installing the RS-2500
This section describes the hardware features and the hardware installation procedure for
the RS-2500. For software configuration, please go to chapter 3 for more details.
2.1 Before You Start
It is important to read through this section before you install the RS-2500
 The RS-2500 comes with everything you need to start installation. You can use
CAT-5 Ethernet cable according to the length you need.
 The RS-2500 must be installed with 5V adapter. Please do not use the other
voltage of adapter.
 During upgrading firmware, please do not renew or close the webpage, otherwise
it could crash the firmware.
 Please do not use FTP to transfer firmware file, because the firmware could be
transferred incompletely. If user upgrades RS-2500 with incomplete firmware it
will damage the device.
2.2 Package Content
The RS-2500 package contains the following items:
 One RS-2500 main unit
 One 5V 2.5A DC power adapter
 2 x RJ-45 Ethernet Cable
 User’s Guide CD
 Quick Start Guide