AirLive RS-2500 - Manual (Page 159)

18. Policy
AirLive RS-2500 User’s Manual 154
 Option
It displays whether every function of Policy is enabled or not. If the function is
enabled and then the chart of the function will appear (See the chart and
illustration below)
Chart Name Illustration
Schedule
Enable the policy to automatically execute the
function in a certain time
Authentication User Enable Authentication User
Traffic Log Enable traffic log
Statistics Enable traffic statistics
Content Blocking Enable Content Blocking
Application Blocking Enable Application Blocking
QoS Enable QoS
 Schedule
Setting the policy to automatically execute the function in a certain time.
 Authentication User
The user have to pass the authentication to connect by Policy
 Trunk
Select the specific VPN setting to allow the packets passing through.
 Traffic Log
Record all the packets that go through policy.
 Statistics
Chart of the traffic that go through policy.
 Content Blocking
To restrict the packets that passes through the policy.
 Application Blocking
To restrict the packets passing via IM, P2P, or the else application..
 QoS
Setting the Guarantee Bandwidth and Maximum Bandwidth of the Policy (the
bandwidth is shared by the users who correspond to the Policy).
 MAX. Bandwidth Per Source IP
Set the maximum bandwidth that permitted by policy. And if the IP bandwidth
exceed the setting value, the surplus connection cannot be set successfully.