Konica Minolta bizhub 282 - Manual (Page 78)

Before making copies 2
362/282/222 2-29
Be
fo
re
m
a
king
c
o
p
ie
s
Chapter 2
2
The machine can receive jobs while it is warming up.
– The touch panel comes on again and, after the machine has fin-
ished warming up, it is ready to begin printing (within 30 seconds at
normal room temperature (73.4°F)).
!
Detail
The length of time until the machine enters Sleep mode can be set from
Utility mode. For details, refer to “Sleep Mode” on page 11-13.
Darkening the touch panel (LCD Back-Light Off)
If no operation is performed for a specified length of time, the touch panel
goes off and the machine enters a mode where it conserves energy.
The power conservation effect is slightly reduced; however, the machine can
quickly recover to begin copying or printing.
As the factory default, the touch panel goes off after 1 minute.
To turn on the touch panel backlight
1
Press any key in the control panel or touch the touch panel.
– The touch panel can also be turned on by opening the original cover
or loading a document into the ADF.
2
The job will be received immediately.
!
Detail
The length of time until the machine touch panel goes off can be set from
Utility mode. For details, refer to “LCD Back-Light OFF” on page 11-13.