Konica Minolta bizhub 282 - Manual (Page 183)

4 Additional copy operations
4-4 362/282/222
Addit
ion
al copy op
era
tions
Chapter 4
2
After checking the settings, touch [Exit] or press the [Mode Check] key
again.
The Basics screen appears again.
!
Detail
There are four Check Job Details screens. The number of the currently
displayed screen appears to the right of the screen title.
To display the previous screen, touch [Back]. To display the next screen,
touch [Fwd].
If the setting for a function has been changed from the default, the button
for that function appears selected.
To change the settings
1
Press the [Mode Check] key.
2
Touch [Back] or [Fwd] until the button for the function to be changed is
displayed.
3
Touch the button for the function whose setting is to be changed.
The screen for specifying the setting appears.
4
Follow the appropriate procedure to change the setting.