4 displaying the administrator management screen, To display the administrator management screen, Displaying the administrator management screen -21 – Konica Minolta bizhub 282 User Manual
Page 362: To display the administrator management screen -21, P. 11-21
Utility mode
11
362/282/222
11-21
Utility mode
Ch
apt
er
11
11.4
Displaying the Administrator Management screen
In order to change Administrator Management settings, display the Adminis-
trator Management screen.
2
Reminder
Be sure to keep the administrator access code in a safe place. If the ad-
ministrator access code is lost while “Enhance Security” is set to “ON”,
Administrator Management settings can no longer be specified. In this
case, the administrator access code cannot be specified again. For de-
tails, contact your technical representative.
To display the Administrator Management screen
1
Press the [Utility/Counter] key.
The Utility/Counter screen appears.
2
Touch [Admin. Manage-
ment].
The Administrator Code
screen appears.
3
Use the keypad to type
in the 8-digit administra-
tor access code, and
then touch [Enter].
–
To change the en-
tered value, press
the [C] (clear) key,
and then enter the
correct value.
–
To cancel changes to
the settings, touch
[Cancel].
The Administrator Management screen appears.