Konica Minolta bizhub 282 - Manual (Page 397)

11 Utility mode
11-56 362/282/222
Utility mode
Ch
apt
er
11
Specifying the pressing of the [Access] key when logging off (mode 438)
Select whether or not the [Access] key be pressed when logging off.
Settings at time of purchase
Specifying the setting
The shaded cells indicate the settings selected at the time of purchase.
Specifying use of registered user authentication information to log on to
the LDAP server (mode 466)
Specify whether or not user names and passwords registered with user au-
thentication are used to log on to the LDAP server.
Settings at time of purchase
5 Specify whether or
not all settings in the
Basics screen are re-
set when copying is
finished using the
ADF. 0 Automatic panel reset
operation is not per-
formed.
1 Automatic panel reset
operation is per-
formed.
4, 3, 2, 1, 0 ----------------------- 00000 * Do not change these
bits when specifying
settings for this func-
tion.
Bit Description Setting Description
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description
7, 6, 5 ----------------------- 000 * Do not change these
bits when specifying
settings for this func-
tion.
4 Specify whether or
not the [Access] key
be pressed when log-
ging off. 0 Specifies that the [Ac-
cess] key not be
pressed when logging
off.
1 Specifies that the [Ac-
cess] key be pressed
when logging off.
3, 2, 1, 0 ----------------------- 0000 * Do not change these
bits when specifying
settings for this func-
tion.