Konica Minolta bizhub 282 User Manual
Konica Minolta Printers
This manual is related to the following products:
Table of contents
Document Outline
- Introduction
- Energy Star®
- Trademarks and registered trademarks
- Contents
- Available features
- Automatically selecting the paper
- Adjusting copies to the size of the paper
- Specifying separate horizontal and vertical zoom ratios
- Scanning the document in separate batches
- Sorting copies
- Stapling copies
- Punching holes in copies
- Center binding
- Copying multiple document pages onto a single page
- Copying a document containing pages of various sizes
- Adjusting copies according to the image quality of the original
- Adding a cover page
- Adding insertions, such as colored paper, within copies
- Inserting paper (interleaves) between copies of overhead projector transparencies
- Adding a binding margin to copies
- Erasing sections of copies
- Repeating copy images
- Separately copying a page spread
- Copying with a layout of a book or magazine
- Printing distribution numbers and stamps
- Printing copies overlapping a different image
- Copying with black and white reversed
- Checking copy jobs
- Programming copy settings
- Checking the copy settings
- Enlarging the size of text in touch panel screens
- Interrupting a copy job
- Printing a proof copy
- Saving copy documents
- Explanation of manual conventions
- User’s Guides
- Descriptions and symbols for documents and paper
- Legal restrictions on copying
- 1 Installation and operation precautions
- 1.1 Safety information
- 1.2 USER INSTRUCTIONS
- 1.3 Laser safety
- Internal laser radiation
- CDRH regulation
- For European users
- For Denmark users
- For Finland, Sweden users
- For Norway users
- Laser safety label
- Ozone release
- Acoustic noise (For European users only)
- Notification for US only
- Recycling batteries (For Taiwan Users Only)
- For EU member states only
- For EU member states only
- 1.4 Caution notations and labels
- 1.5 Space requirements
- 1.6 Operation precautions
- 2 Before making copies
- 2.1 Part names and their functions
- Options
- Outside of machine
- Inside/back of main unit
- Reverse Automatic Document Feeder DF-620
- Paper Feed Cabinet PC-108/PC-206/PC-407
- Saddle Stitcher SD-507/Mailbin Kit MT-502
- Finisher FS-530/Output Tray OT-602/Punch Unit PU-501
- Control panel
- Basic settings screen (Basics screen)
- Icons that appear in the screen
- Enlarging the touch panel screens
- 2.2 Adjusting the angle of the control panel
- 2.3 Turning on the main power and the auxiliary power
- To turn on the machine
- To scan during warm-up
- To turn off the machine
- Automatically returning to the default settings (Automatic panel reset)
- Automatically returning to the screen given priority
- Automatically conserving energy (Low Power mode)
- Automatically conserving energy (Sleep mode)
- Darkening the touch panel (LCD Back-Light Off)
- Controlling machine use with user authentication (machine authentication)
- Controlling machine use with user authentication (external server authentication)
- Limiting user access with account track
- Controlling machine use with user authentication (external server authentication) and account track
- Controlling machine use with user authentication (machine authentication) and account track
- Controlling machine use with user authentication (machine authentication) and account track synchronized
- 2.4 Loading paper into the 1st or 2nd tray
- 2.5 Loading paper into the LCT
- 2.6 Loading paper into the bypass tray
- 2.1 Part names and their functions
- 3 Basic copy operation
- 3.1 General copy operation
- 3.2 Operations that cannot be combined
- 3.3 Feeding the document
- 3.4 Specifying document settings
- Copying documents of mixed sizes (“Mixed Original” setting)
- To copy documents with the “Mixed Original” setting
- Selecting the document orientation (Original Direction settings)
- To select an Original Direction setting
- Selecting the position of the binding margin (Margin settings)
- To select a Margin setting
- 3.5 Selecting a Paper setting
- 3.6 Specifying a Zoom setting
- Automatically selecting the zoom ratio (“Auto Zoom” setting)
- Specifying the same zoom ratio as the document (“×1.0” setting)
- Slightly reducing the copy (“Minimal” setting)
- Finely adjusting the zoom ratio
- Selecting a preset zoom ratio (Enlarge and Reduce settings)
- Typing in the zoom ratio
- Specifying separate horizontal and vertical zoom ratios (Individual Zoom settings)
- Selecting a stored zoom ratio
- Storing the desired zoom ratio
- 3.7 Selecting single-/double-sided settings for originals and copies
- 3.8 Specifying document quality/density settings
- 3.9 Selecting a Combine Originals setting
- 3.10 Selecting finishing for copies
- 3.11 Scanning the next document during printing (reserving a copy job)
- 3.12 Stopping/deleting a job
- 4 Additional copy operations
- 5 Troubleshooting
- 5.1 When the message “Malfunction detected.” appears (Call technical representative)
- 5.2 When the message “Misfeed detected.” appears
- Location of paper misfeed
- Paper misfeed indications
- To clear a paper misfeed in the ADF
- To clear a paper misfeed in the fusing unit
- To clear a paper misfeed in the automatic duplex unit
- To clear a paper misfeed in the bypass tray
- To clear a paper misfeed in the 1st or 2nd tray
- To clear a paper misfeed in the 3rd or 4th tray
- To clear a paper misfeed in the LCT
- To clear a paper misfeed in the finisher
- To clear a paper misfeed in the mailbin kit
- To clear a paper misfeed in the saddle stitcher
- 5.3 When the message “Replenish paper.” appears
- 5.4 When the message “... Not enough remaining memory.” appears
- 5.5 When the message “Please exchange toner.” appears
- 5.6 When the message “Stapler empty.” appears
- 5.7 Basic troubleshooting
- 5.8 Main messages and their remedies
- 6 Specifications
- 7 Copy paper/original documents
- 8 Application functions
- 8.1 Adding cover pages (“Cover Mode” function)
- 8.2 Inserting cover pages (“Insert Sheet” function)
- 8.3 Inserting paper between overhead projector transparencies (“OHP Interleave” function)
- 8.4 Adding filing margins to copies (“Page Margin” function)
- 8.5 Erasing unwanted areas of copies (“Edge/Frame Erase” function)
- 8.6 Tiling copy images (“Image Repeat” function)
- 8.7 Producing separate copies of each page in a page spread (“Book Copy” function)
- 8.8 Creating booklet copies (“Booklet” function)
- 8.9 Printing additional information on copies (Image Settings functions)
- 8.10 Printing copies overlapping a different image (“Image Overlay” function)
- 8.11 Copying with light and dark coloring inversed (“B/W Reverse” setting)
- 8.12 Separate scan
- 9 Replacing toner bottles and staples and emptying punch waste containers
- 10 Care of the machine
- 11 Utility mode
- 11.1 Overview of Utility mode parameters
- 11.2 Specifying User’s Choice settings
- To specify User’s Choice settings
- Mixed Original Detection
- Language Selection
- Measurement Unit Setting
- Machine Authentication PW Change
- Default Setting Simplex/Duplex
- Auto Paper/Auto Zoom
- Priority Tray
- Special Paper Setting
- Zoom Ratio for Combine/Booklets
- Low Power Mode
- Sleep Mode
- LCD Back-Light OFF
- Auto Reset
- Auto Reset when Account is changed
- 4in1 Copy Order
- Default Quality/Density Modes
- Default Copy Output Levels
- Print Density
- Default Finishing Mode
- Sort/Non-Sort Auto Change
- Output Tray Settings
- Auto Paper Select for Small Orig.
- Crease/Center Staple
- Default Screen
- Default Device
- Image Quality (ADF)
- 11.3 Specifying User Management settings
- 11.4 Displaying the Administrator Management screen
- 11.5 Specifying Initial Settings
- 11.6 Specifying Administrator settings
- 11.7 Specifying the account/authentication settings (User Authentication ON/OFF parameters)
- 11.8 Specifying account data settings
- 11.9 Specifying user authentication settings
- 11.10 Specifying software switch settings (machine functions)
- To specify a software switch setting
- Specifying permissions for copy functions (mode 307)
- Specifying the enlarged display method (mode 311)
- Specifying that the “Auto Paper Select” setting and the “Auto Zoom” setting can be selected at the same time (mode 403)
- Specifying the measurement units (mode 426)
- Specifying settings when copying is finished using the ADF (mode 429)
- Specifying the pressing of the [Access] key when logging off (mode 438)
- Specifying use of registered user authentication information to log on to the LDAP server (mode 466)
- Specifying whether to enable access locks and password rules, and specifying the method for deleting image data (mode 469)
- Specifying the setting for displaying a list of users in the User Authentication screen (mode 471)
- Specifying the deleting method for [Del.] in input screens (mode 478)
- Specifying settings for limiting user authentication to only Scan functions (mode 479)
- 11.11 Specifying security settings (Security Setting parameters)
- 11.12 Managing the memory (Memory Management parameters)
- 11.13 Password rules
- 12 Appendix