Konica Minolta bizhub 282 - Manual (Page 351)

11 Utility mode
11-10 362/282/222
Utility mode
Ch
apt
er
11
4
Select a tab, and then
select a parameter to be
set.
5
Specify the desired settings, and then touch [Enter].
– To cancel changes to the settings, touch [Cancel].
– To exit the User’s Choice screens, touch [Enter] in each screen until
the Basics screen appears.
Mixed Original Detection
Language Selection
2
Note
If user authentication is performed to log onto the machine, then the dis-
play language is changed, it will no longer be possible to log on to the
machine normally with the next authentication. In this case, it will be nec-
essary to change the software switch settings. For details, contact your
technical representative.
Tab Parameter Description Default Setting
1/6 Mixed Original De-
tection Specify whether or not the “Mixed Origi-
nal” setting is selected as a default. OFF
Tab Parameter Description Default Setting
1/6 Language Selec-
tion Select one of the following as the lan-
guage in which messages appear in the
touch panel.
English, French, Spanish, Japanese English