Konica Minolta bizhub 282 - Manual (Page 186)

Additional copy operations 4
362/282/222 4-7
Addit
ion
al copy op
era
tions
Chapter 4
4.3 Interrupting a copy job (Interrupt mode)
The current jobs can be temporarily interrupted so a document can be cop-
ied with different copy settings.
To interrupt a copy job
1
Position the document to be copied. (Refer to page 3-8 for details.)
2
Press the [Interrupt] key.
– If a job is being print-
ed, the message
“Job is stopping.”
appears.
The indicator on the [In-
terrupt] key lights up in
green and printing of the
current job stops.
? What happens if the [Interrupt] key is pressed while a document is
being scanned?
% Pressing the [Interrupt] key returns all copy settings, except the
number of copies, to their defaults.
3
Select the desired copy settings.
4
Press the [Start] key.
Printing begins for the job that the previous job was interrupted for.
5
After the interrupting job has finished printing, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off.
The copy settings return to those specified before printing was inter-
rupted.
2
Note
If the interrupting job is cancelled, printing for the interrupted job auto-
matically restarts.
Interrupt