Konica Minolta bizhub 282 - Manual (Page 155)

3 Basic copy operation
3-40 362/282/222
Ba
sic co
py ope
ra
tio
n
Chapter 3
To select single-sided copies
0 As a factory default, the “Single-Sided” Original setting and the “Single-
Sided” Copy setting are selected.
0 If the “Double-Sided” Original setting and the “Single-Sided” Copy set-
ting are selected, specify the position of the binding margin and the load-
ing orientation for the document, otherwise the copies will not be printed
as desired. For details on specifying the position of the binding margin,
refer to “Selecting the position of the binding margin (Margin settings)” on
page 3-21. For details on specifying the document orientation, refer to
“Selecting the document orientation (Original Direction settings)” on
page 3-19.
0 For details on using the original glass to scan multiple document pages,
refer to “Scanning a multi-page document from the original glass” on
page 3-14.
1
In the Basics screen,
touch [Simplex/Duplex].
The Simplex/Duplex
screen appears.
Double-Sided % Double-Sided Select this setting to produce double-sided copies from
double-sided documents.
Original/copy settings Description
2
1
2
1