5 specifying initial settings, To specify initial settings, Specifying initial settings -23 – Konica Minolta bizhub 282 User Manual
Page 364: To specify initial settings -23, P. 11-23)
Utility mode
11
362/282/222
11-23
Utility mode
Ch
apt
er
11
11.5
Specifying Initial Settings
From the Initial Settings screen, the date and time and time zone can be
specified.
The following procedure describes how to display the Initial Settings screen
and specify its settings.
To specify initial settings
1
Display the Administrator Management 1 screen, and then touch [Initial
Settings].
–
For details on displaying the Administrator Management 1 screen,
refer to “Displaying the Administrator Management screen” on
page 11-21.
The Initial Settings screen appears.
2
Select a parameter to be
set.
3
Specify the desired settings, and then touch [Enter].
–
To cancel changes to the settings, touch [Cancel].
–
To exit the Initial Settings screen, touch [Enter] in each screen until
the Basics screen appears.
!
Detail
For details on specifying parameters other than the “Date & Time Setting”
parameter, refer to the User’s Guide [Facsimile Operations].