Konica Minolta bizhub 282 - Manual (Page 13)

Introduction
x-12 362/282/222
8.5 Erasing unwanted areas of copies
(“Edge/Frame Erase” function) ......................................................8-13
To copy using the “Edge/Frame Erase” function .........................8-13
8.6 Tiling copy images (“Image Repeat” function) .............................8-15
To copy using the “Image Repeat” function .................................8-15
8.7 Producing separate copies of each page in a page spread
(“Book Copy” function) ...................................................................8-18
To copy using the “Book Copy” function .....................................8-19
8.8 Creating booklet copies (“Booklet” function) ...............................8-22
To copy using the “Booklet” function ...........................................8-23
8.9 Printing additional information on copies
(Image Settings functions) ..............................................................8-24
To print the distribution number (“Set Numbering” function) .......8-24
To print preset text at the center of the copy image
(“Stamp” function) .........................................................................8-26
8.10 Printing copies overlapping a different image
(“Image Overlay” function) .............................................................8-28
To store an overlay image (Store Overlay) ....................................8-28
To recall an overlay image ............................................................8-31
To check the overlay image ..........................................................8-33
8.11 Copying with light and dark coloring inversed
(“B/W Reverse” setting) ..................................................................8-35
To copy using the “B/W Reverse” setting ....................................8-35
8.12 Separate scan ..................................................................................8-36
To scan documents continuously .................................................8-36
9 Replacing toner bottles and staples and emptying punch
waste containers
9.1 Replacing the toner bottle ................................................................9-2
To replace the toner bottle .............................................................9-4
9.2 Replacing the staple cartridge .........................................................9-7
To replace the staple cartridge in finisher .......................................9-7
To replace the staple cartridge in saddle stitcher .........................9-10
9.3 Clearing a staple jam ......................................................................9-14
To clear jammed staples in finisher ..............................................9-15
To clear jammed staples in the saddle stitcher ............................9-19
9.4 Emptying the waste containers ......................................................9-24
To empty the hole-punch waste container ...................................9-24