Konica Minolta bizhub 282 - Manual (Page 352)

Utility mode 11
362/282/222 11-11
Utility mode
Ch
apt
er
11
Measurement Unit Setting
Machine Authentication PW Change
2
Note
This parameter appears only when the machine is being used with the
machine user authentication settings specified.
Default Setting Simplex/Duplex
Auto Paper/Auto Zoom
Tab Parameter Description Default Setting
1/6 Measurement Unit
Setting Select one of the following as the meas-
urement units in which values are dis-
played in the touch panel.
mm (Num. Value), Inch (Num. Value),
Inch (Fraction) Inch (Num. Value)
Tab Parameter Description Default Setting
1/6 Machine Authenti-
cation PW Change The password entered for machine au-
thentication with user authentication can
be changed.
• Current Password:
Type in the currently specified ma-
chine authentication password.
• New Password:
Type in the new machine authentica-
tion password.
• Confirm New Password:
Type in the new machine authentica-
tion password again for confirmation.
-
Tab Parameter Description Default Setting
2/6 Default Setting
Simplex/Duplex Select one of the following as the default
Single/Double-Sided setting.
If the “Simplex -> Duplex” parameter in
the Tech. Rep. Choice screen is set to
“duplex only”, [1
→1] does not appear.
For details, contact your technical repre-
sentative.
1
→2, 2→2, 1→1
1 →1
Tab Parameter Description Default Setting
2/6 Auto Paper/Auto
Zoom Select one of the following as the default
setting.
Auto Paper Select, Auto Zoom, Manual Auto Paper Select