Konica Minolta bizhub 282 - Manual (Page 417)

12 Appendix
12-4 362/282/222
Ap
pe
ndix
Chapter 12
12.2 Glossary
Term Definition
Simplex/Duplex Select the setting to specify if the scanned document and the printed
copy are printed on just one side or both sides.
Access lock Operations that the access lock is applied to are locked so that the
password cannot be entered after it has been incorrectly entered
three consecutive times.
Accessibility Specify these settings to set up and adjust the control panel and
touch panel.
Account Track Set this function to group users into accounts and manage their use
of the machine (printing and scanning counts and number of prints).
ADF Reverse automatic document feeder; Can be used to automatically
scan the document
AMS Auto Magnification Select; “Auto Zoom” setting
APS “Auto Paper Select” setting
ATS Automatic paper-tray-switching feature (ATS = Auto tray switch)
Automatic paper-tray-
switching feature If a paper tray runs out of paper while copies are being printed and
the same size of paper is detected in a different paper tray, that pa-
per tray is selected so that copying can continue.
Automatic panel reset The machine automatically performs this operation to return all set-
tings to their defaults if no operation is performed for the specified
length of time.
Auto Paper Select Select this setting to detect the document placed on the original
glass or loaded into the ADF, then automatically select paper of the
same size if “×1.0” is selected or select the paper size appropriate
for the specified zoom ratio.
Auto Zoom Select this setting to automatically select the appropriate zoom ratio
after a document is placed on the original glass or loaded into the
ADF and the copy paper size is selected.
B/W Reverse Set this function to copy the document with the light- and dark-
colored areas or the gradations of the image inversed.
Center Erase Select this setting to print copies with the center (fold) of the docu-
ment erased.
Change Tray Settings Touch this button to specify a paper size not loaded in a paper tray
or to copy on paper other than plain paper.
Chapters Set this function to specify chapter title pages that must be printed
on the front side of the paper when printing double-sided copies.
Combine Originals Select a setting to arrange reduced copies of multiple document
pages on a single copy page. The settings for the number of pages
that can be combined are “2 in 1”, “4 in 1” and “8 in 1”.
Cover Mode Set this function to add paper from the specified paper tray to the
copies as a cover page.
Density Select a setting to adjust the density of the print image to one of nine
levels.
Edge/Frame Erase Set this function to erase unwanted areas from the document, such
as the shadows around the edges and the fold.