Konica Minolta bizhub 282 - Manual (Page 376)

Utility mode 11
362/282/222 11-35
Utility mode
Ch
apt
er
11
2
Select the desired set-
tings.
– Touch [General Set-
tings] to display the
Account Registr.
screen, and then
change the settings.
– For details on chang-
ing settings in the
Account Registr.
screen, refer to “To
register an account”
on page 11-32.
– Touch [Clear Counter] to display a message confirming that the
counters will be reset. To reset all counters for the selected account
to 0, touch [Yes].
– Touch [Counter] to
display the Counter
screen, which con-
tains the counters for
the selected ac-
count.
– In the Counter
screen, touch [Fwd]
to display the next
screen, or touch
[Back] to display the
previous screen.
3
Touch [Exit], and then touch [Enter] in the next screen that appears.
– To exit the Account/Authentication screen, touch [Enter] in each
screen until the Basics screen appears.
The screen for selecting an account number appears again.
2
Note
In the screen for selecting an account number, touch [Reset All
Counters], then [Yes], and then touch [Enter] to reset all counters for all
accounts to 0.
Counter screen