Konica Minolta bizhub 282 - Manual (Page 399)

11 Utility mode
11-58 362/282/222
Utility mode
Ch
apt
er
11
*1 This setting is applied after the machine is turned off, then on again.
!
Detail
If “Enhance Security” is set to “ON”, the access lock, password rules and
overwriting of temporary data are enabled. For details on the “Enhance
Security” parameter, refer to “Specifying security settings (Security Set-
ting parameters)” on page 11-62.
The access lock can be canceled with each password. For details, refer
to “Canceling an access lock (“Unlock” parameter)” on page 11-66.
For details on the password rules, refer to “Password rules” on
page 11-70.
Bit Description Setting Description
7 Specify whether to
lock access when a
password (account
track and administra-
tor passwords) is en-
tered incorrectly three
times. 0 Does not lock access
1 Locks access
6 Specify whether or
not image data on the
hard disk is overwrit-
ten to delete it.*1 0 Image data on the
hard disk is not over-
written when it is de-
leted.
1 Image data on the
hard disk is overwrit-
ten when it is deleted.
5 --------------------- 0 *Do not change this
bit when specitying
settings for this func-
tion.
4 For security, specify
whether to apply a
password rule. 0 Do not apply a pass-
word rule
1 Apply a password rule
3, 2, 1, 0 --------------------- 0000 * Do not change these
bits when specifying
settings for this func-
tion.