Konica Minolta bizhub 282 - Manual (Page 195)

4 Additional copy operations
4-16 362/282/222
Addit
ion
al copy op
era
tions
Chapter 4
To set the “Key Speed Settings” function
It is possible to specify the length of time until the value begins to change af-
ter a touch panel button is held down and the length of time for the value to
change to the next number.
0 The factory default setting for “Time to Start” is 0.3 second, and the fac-
tory default setting for “Interval” is 0.1 second.
1
Display the Accessibility Settings screen. (For details, refer to
page 4-14.)
2
Touch [Key Speed Settings].
The Key Speed Settings screen appears.
3
Touch and to
specify the starting time
and the interval for the
key repeat feature.
The starting time and the
interval for the key re-
peat feature specify the
speed at which a value
changes when
or
is held down to
change a setting.
? How are the specified time settings checked?
% Touch [CHECK] to check the specified key repeat settings.
4
Touch [Enter].
The Accessibility Settings screen appears again.
Starting time
Interval