Konica Minolta bizhub 282 - Manual (Page 418)

Appendix 12
362/282/222 12-5
Ap
pe
ndix
Chapter 12
Enhance Security The various enhanced security features for preventing unauthorized
use of this machine and for increasing security when managing
saved data.
Enlarge Display In this mode, the screens are displayed larger for easier operation.
Erase Set this function to erase the unwanted parts of the document im-
age.
Finisher This unit sorts and finishes copies that have been fed out.
Fold & Staple Set this function to fold the copies in half and staple them together
at the center.
Folding Select the folding setting to specify how copies are folded. Depend-
ing on the finisher and other options that are installed, the “Crease”
and “Center Binding” settings are available.
Group Select this setting to separate the copies of each page in the docu-
ment. The specified number of copies of the second page is printed
after all copies of the first page are finished.
Select this setting to separate copies that are fed out.
Image Repeat Set this function to repeatedly print the image scanned from the doc-
ument to fill the entire page
Image Settings Set the appropriate function to make copies with the desired image
added.
Set the “Set Numbering” function to print copies with a distribution
number in the background.
Set the “Stamp” function to print copies with one of the preset
stamps, such as “TOP SECRET”, “COPY” or “PROOF”.
Set the “Image Overlay” function to print copies overlapping a differ-
ent scanned image.
Insert Image Set this function to later scan multiple images from the original glass
and insert them at the desired locations in a document scanned with
the ADF, then feed out all copies together.
Insert Sheet Set this function to insert paper from the specified paper tray into the
copies as chapter title pages.
Job The copy operation that is queued on the machine while copying;
Multiple jobs can be queued on the machine.
LCT Optional paper feed cabinet that can be loaded with up to 2,500
sheets of paper.
Low Power Mode The machine automatically enters this mode, where it conserves en-
ergy, if no operation is performed for the specified length of time. In
this mode, the touch panel go off.
Margin Select the setting for the position of the binding margin for the load-
ed document. Selecting the appropriate setting prevents the copy
from being printed upside-down when making double-sided copies
from single-sided documents or when making single-sided copies
from double-sided documents.
Memory Scan Scans a document exceeding the maximum 80 pages that can be
loaded into the ADF by scanning the document in separate batches.
The document can be scanned and treated as a single copy job. In
addition, the scanning location can be switched between the original
glass and the ADF during the scanning operation.
Term Definition