Konica Minolta bizhub 282 - Manual (Page 172)

Basic copy operation 3
362/282/222 3-57
Ba
sic co
py ope
ra
tio
n
Chapter 3
3
Touch [Position Setting],
and then select the de-
sired position.
– Touch [Auto] to auto-
matically determine
the binding position
according to the ori-
entation of the load-
ed document.
4
Touch [Enter].
The Finishing screen appears again.
Punching holes in copies (punch settings)
!
Detail
If a punch setting is to be selected, select the orientation in which the
document is positioned. If an Original Direction setting is not selected,
holes may not be punched in the copies as desired. For details on spec-
ifying the document orientation, refer to “Selecting the document orien-
tation (Original Direction settings)” on page 3-19.
When finisher is installed
To punch holes in copies
1
In the Basics screen,
touch [Finishing].
The Finishing screen ap-
pears.
Paper Weight Paper Size
16 lb to 24 lb 11 × 17 w, Letter w/v