Festo Контроллер позиционирования CPX-CMAX - Manual (Page 83)

4. Commissioning
4−5
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
4.1.2 Installing the Festo Configuration Tool and FCT CMAX plug−in
The Festo Configuration Tool (FCT) is the software platform for
configuring and commissioning different components and
devices from Festo.
The FCT consists of the following components:
ć A framework as program start and entry point with uniĆ
form project and data management for all supported
types of devices.
ć A plug−in for each of the special demands of each device
type (e.g. CMAX) with the necessary descriptions and
dialogs. The plug−ins are managed and started from the
framework.
The CMAX plug−in for the Festo Configuration Tool helps to
carry out all the steps necessary for commissioning a CMAX.
With the CMAX plug−in CMAX for the Festo Configuration Tool,
you can carry out most parameterisations offline, i.e. without
the CMAX having to be connected to the PC, e.g. for preparĆ
ing the actual commissioning while the system is being deĆ
signed.
Installing the FCT
The FCT is installed using an installation program on your PC
under Windows 2000, XP or Vista. The CMAX plug−in is inĆ
stalled on your PC together with the installation program of
the FCT.
Note
Administrator rights are required for installing the FCT.