Festo Контроллер позиционирования CPX-CMAX - Manual (Page 39)

2. Fitting and pneumatic installation
2−9
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
Shock absorbers / fixed stops
Shock absorbers or fixed stops are recommended, depending
on the specific application and the drive used. These fulfil the
following functions:
ć Protection of the drive or position measuring system
ć Definition or setting of the end positions, as needed
Note
Damage due to uncushioned travel into the end positions.
· Carry out commissioning again after adjusting the fixed
stops or when components and tubing have been reĆ
placed.
Use suitable external stops or shock absorbers / fixed stops
from Festo.
Information on mounting the Festo shock absorbers / fixed
stops is provided in the operating instructions for the drive or
the assembly instructions for the shock absorbers / fixed
stops.