Festo Контроллер позиционирования CPX-CMAX - Manual (Page 143)

5. Diagnostics and error handling
5−21
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
Malfunction group 4 ć System error A
CPX error group 104 (CPX−MMI: [System error A] ) Continued
No. Type 1) Error handling Cause/description Message
44 Teaching not possible 2)
(continued)
Specified record number
is not permissible during
teaching in record select
operating mode. · Correct record
number. Error
level: F1
Reset: R
Parametrising control
mode of the selected reĆ
cord is not permissible
during teaching in record
select operating mode. · Correct the control
mode, correct the reĆ
cord number.
45 Commissioning function
or parameter value inĆ
valid Invalid function number
at start of a commisĆ
sioning function in comĆ
missioning operating
mode.
3)
· Correct the function
number. Error
level: F1
Reset: R
At least one parameter
of the started commisĆ
sioning function had an
invalid value.
3)
· Check parameter 1
and parameter 2 and
correct.
Movement test started
after there already was a
successfully executed
movement test. · Reset the movement
test first.
46 Start not possible with
active teach command Commissioning operatĆ
ing mode: Starting a
commissioning function
during teaching is not
permissible. · Do not execute a
start during teaching.
End teaching first. Error
level: F1
Reset: R
47 Start of tracking mode
requires MC Starting tracking mode
during an active posiĆ
tioning job is not perĆ
missible. · End active positioning
job and wait for MoĆ
tion Complete"
(SPOX.MC=1). Error
level: F1
Reset: R
1) For the error level and reset type, see section 5.2.3.
2) For an exact cause, see the diagnostic memory.
3) See I/O data in the CMAX communication profile" description.