Festo Контроллер позиционирования CPX-CMAX - Manual (Page 157)

5. Diagnostics and error handling
5−35
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
5.4 Diagnostics via the display/7−segment display
The CMAX shows status and diagnostic information directly
on the display/7−segment display.
1
1. position
(e.g. code letter for
parameter or status
type)
2
Point for separation
3
2. and 3rd position
(e.g. value, error level
or status information)
1
2
3
Fig. 5/2: Display/7−segment display
5.4.1 Error status
Error messages are shown on the display in addition to the
red error LED on the CMAX.
Display Description
= There is an error ( Error)
= For the malfunction group and number, see section 5.2.4
(example E50: Operating pressure is too low").
Tab. 5/5: Error number display
Warnings are not shown on the display.