Festo Контроллер позиционирования CPX-CMAX - Manual (Page 29)

1. CMAX system overview
1−7
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
1.3 Parameterisation and commissioning options
Tab. 1/1 provides an overview of the commissioning,
parameterising and teaching options.
Operated via Properties For details, see
FCT CMAX plug−in Ĉ Easy commissioning thanks to special dialogues
and functions.
Ĉ Direct on−site" operation with drive monitoring
is possible
Ĉ PC must be connected on site with the diagnostic
interface of the CPX terminal.
Chapter 4,
help for FCT CMAX
plug−in
Master controller,
CPX node
(CPX bus node or
CPX−FEC) Ĉ Parameterisation of several positioning
systems is possible.
Ĉ Commissioning and teaching require additional
measures for the necessary drive monitoring.
Ĉ Additional programming required.
CMAX communication
profile" description,
P.BE−CPX−CMAX−CONĆ
TROL−...
Tab. 1/1: Commissioning, parameterising and teaching options
1.3.1 Festo Configuration Tool (FCT)
The Festo Configuration Tool (abbreviated as FCT) is the softĆ
ware platform for configuring and commissioning various
Festo components and devices.
The CMAX plug−in for the FCT helps to carry out all the steps
necessary for commissioning a CMAX.
An overview for commissioning with the FCT can be found in
chapter 4.
The help for the FCT contains the complete information on
operating the Festo Configuration Tool. The device−specific
plug−ins each have their own help files.