Festo Контроллер позиционирования CPX-CMAX - Manual (Page 161)

5. Diagnostics and error handling
5−39
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
5.5 Diagnostic functions with the CPX−MMI
General information on operating and commissioning the CPX
terminal using the CPX operator unit (handheld) can be found
in the description for the CPX−MMI, type P.BE.CPX−MMI−1−... .
5.5.1 Error display ([Diagnostics] menu)
Modules that signal an error are marked in the main menu by
an exclamation mark (!) in front of the module number.
Any errors are displayed as input channel errors in the
[Diagnostics] menu.
System Overview _
CPX terminal
0: ... Module ...
1: ... Module ...
! 2: CMAX−C1−1 1 Serð
3: ... Module ...
_____________________________________________________
Diag ßà OK
1
2:CMAX−C1−1 _
Monitoring/Forcing (M)
Diagnostics (D)
Parameters (P)
Module data (MD)
_____________________________________________________
Back OK
2:CMAX−C1−1 :D _
Channel fault:
Ch 0: Input
Configuration error
______________________________________________________
Back ßà
2
3
4
1
Existing errors
2
[Diagnostics] menu
3
Error number and description
4
Acknowledge errors (reset)
Fig. 5/3: Error display with the CPX−MMI
CMAX errors cannot be acknowledged with the CPX−MMI.