ADTRAN Atlas 550 - Manual (Page 98)

Chapter 8. Packet Manager
8-4 ATLAS 550 User Manual 61200305L1-1
A NNEX A
The endpoint is signaling using ITU-T Q.933-A.
A NNEX D
The endpoint is signaling using ANSI T1.617-D.
LMI
The endpoint is signaling using Group of Four LMI specification.
S IG S TATE Read Security: 5
Indicates the current condition (i.e., active frame relay signaling) of this
packet endpoint, as defined by the frame relay configuration settings. This
field is either
A CTIVE or I NACTIVE .
C URRENT P ORT Read Security: 5
Displays the connections for the packet endpoint. The letter
U in this field
indicates that this packet endpoint is used in the P ACKET C NCTS map (also
see Packet Cncts on page 8-13). The remainder of the field indicates the
physical port to which this packet endpoint is connected, as defined in the
D EDICATED M AP (also see Dedicated Maps on page 10-1). If the port is a chan-
nelized interface such as a T1, the DS0 assignment is also provided.
P ERFORMANCE Displays performance information for each packet endpoint including E ND -
PNT N AME (endpoint name), P ROTOCOL , L INK S TATS , and S UBLINK S TATS .
E NDPNT N AME Read Security: 5
Displays the packet endpoint name as defined in
P ACKET E NDPNTS /C ONFIG
(also see Config on page 8-6).
P ROTOCOL Read Security: 5
Displays the layer 2 protocol that this packet endpoint terminates as
defined in
P ACKET E NDPNTS /C ONFIG (also see Config on page 8-6).
L INK S TATS Read Security: 5
Displays layer 2 performance statistics. This field is dependent on the type
of protocol (Frame Relay or TBOP) selected in
P ACKET E NDPNTS /C ONFIG
(also see Config on page 8-6).
Frame Relay Statistics
These fields reflect the total count since last cleared:
T X P ACKETS
Total number of frame relay packets transmitted through this packet end-
point, including both user data (on all PVCs) and signaling.
R X P ACKETS
Total number of frame relay packets received through this packet endpoint
(on all PVCs).