ADTRAN Atlas 550 - Manual (Page 106)

Chapter 8. Packet Manager
8-12 ATLAS 550 User Manual 61200305L1-1
S TART
The fixed duration that T EST is not running and the DLCI is not config-
ured for continuous in-band delay measurement. To change this option,
set
D IAGNOSTIC M ODE to I N - BAND D ELAY M EASUREMENT (also see In-Band
Delay Measurement on page 8-10).
C ONT D LY
The fixed duration T EST is not running and the DLCI is configured for
continuous in-band delay measurement. The following R ESULTS menu
accumulates these measurements.
S TOP T ST
The fixed duration T EST is running. The following D URATION field
shows the time remaining in the current test.
D URATION
Shows the duration in seconds for the fixed-duration test.
R ESULTS [MN/AV/MX D LY ]
Displays the minimum, average, and maximum delay for the delay-mea-
surement test.To display the additional test results, place the cursor over
this field and press
Enter on the keyboard. These times are in milliseconds.
E CHO P KT T X
Displays the total number of test packets that have been transmitted.
E CHO P KT R X
Displays the total number of test packets that have been received.
E CHO P KT D ROPPED
Displays the total number of packets lost in the receiving direction
(traveling from the remote ADTRAN frame relay device to the ATLAS
550).
R MT P KT D ROPPED
Displays the total number of packets lost in the transmit direction (trav-
eling from the ATLAS 550 to the remote ADTRAN frame relay device).
M IN D ELAY
Displays the minimum round trip delay for the current test period.
M AX D ELAY
Displays the maximum round trip delay for the current test period.
A VG D ELAY
Displays the average round trip delay for the current test.
R ESET C OUNTERS
Resets the counters.
E NDPNT C OUNT Read Security: 5
Displays the total number of packet endpoints configured.
E NDPNTS S ORT Write Security: 3; Read Security: 5
Provides sorting options.
S ORTING B Y N AME sorts packet endpoints alpha-
betically by name. If you do not want to sort packet endpoints, set this
option to
O FF .