ADTRAN Atlas 550 - Manual (Page 84)

Chapter 6. System Control Terminal Menus
6-22 ATLAS 550 User Manual 61200305L1-1
S ELFTEST Write security: 3; Read security: 5
Runs system-wide Self-test, Memory, Flash, Bootrom, and PortTests. These
tests are disruptive to all data traffic; therefore, do not run these tests on a
unit unless data interruptions are acceptable. To confirm self-test activation,
press
Y ; to cancel the self-test, press N .
S ELECTED
T ESTS
Write security: 3; Read security: 5
Allows the user to select a system-wide test or an individual card test.
Choose from
ALL TESTS , S LOT :S LT 0 S YS C TRL , or any other installed
option/network module.
C URRENT T EST
S TATUS
Read security: 5
Displays which part of
S ELFTEST is currently being run. See View Selftest Log
on page 6-22 for details on individual tests.
C URRENT S LOT /
P ORT
Read security: 5
Displays slot and port of the subsystem currently being tested.
V IEW S ELFTEST
L OG
Read security: 5
Displays time-stamped log of the tests conducted and the Pass/Fail results.
Self-tests verify data integrity and processor control to each port. Each port
is looped back and a data pattern is sent and tested. The result of the self-
test on each installed port is listed with Pass/Fail results. Figure 6-6 shows
a typical test log.
Figure 6-6. View Self-test Log
The self-test log includes the following fields.:
I DX Index number of the log.
T IME Time and date of the log entry.
S L ATLAS 550 slot number.
P T ATLAS 550 port number.
E VENT Event description.
R ESULT Shows Pass/Fail results.