ADTRAN Atlas 550 User Manual
Page 122
Chapter 9. Router
9-8
ATLAS 550 User Manual
61200305L1-1
A
UTHENTICATION
Write security: 2; Read security: 5
Enables the V2 Secret to be advertised when using RIP V2.
A
UTHENTICA
-
TION
is visible only if
RIP V2
is
E
NABLED
(see the previous section, Pro-
tocol on page 9-7). When enabled, requires all received RIP V2 packets to
be authenticated against the configured V2 secret. All transmitted RIP
V2 packets will include the secret.
V2 S
ECRET
Write security: 2; Read security: 5
Defines the secret used to advertise routes
when using
RIP V2
. To create the secret,
enter the new secret, and press
Enter
on the
keyboard. Then re-enter the secret and press
Enter
again to confirm it.
V2 S
ECRET
is only visible if
A
UTHENTICATION
is set to
E
NABLED
.
P
ROXY
ARP
Write security: 2; Read security: 5
Enables or disables proxy ARP on this interface.
E
THERNET
Write security: 2; Read security: 5
Provides a way to configure various settings for the Ethernet port. The fol-
lowing options are available for review and editing:
P
ORT
N
AME
Defines the name of the Ethernet port. You can leave this field blank.
IP A
DDRESS
Lists the address assigned to the base Ethernet port. This address is com-
posed of four decimal numbers, each in the range of 0 to 255, separated by
periods. This value is set to 0.0.0.0 by default. The IP address is used for the
Ethernet interface. Obtain the correct IP address from your LAN administra-
tor.
D
EFAULT
G
ATEWAY
Defines or changes the default gateway. Enter the default gateway address
by entering a decimal number into the appropriate field and then pressing
Enter
to move to the next field. You will need a default gateway if the LAN
contains multiple segments. This address is composed of four decimal num-
bers, each in the range of 0 to 255, separated by periods. This value is set to
0.0.0.0 by default. Contact your LAN administrator for the appropriate ad-
dress.
This parameter is global throughout the ATLAS 550. Changes
here affect all router interfaces.