ADTRAN Atlas 550 - Manual (Page 151)

Chapter 11. Dial Plan
61200305L1-1 ATLAS 550 User Manual 11-9
G LOBAL P ARAM Sets ATLAS 550 options which apply to all switched operations, both incom-
ing and outgoing calls.
E ND OF N UMBER
T IMEOUT
Write security: 3; Read security: 5
Sets the length of time ATLAS 550 waits before assuming the outgoing
dialed number is complete. The default value is six seconds. This timeout
will only be invoked if the dialed number does not match one of the pat-
terns set in the Number Complete Template menu (see the section, Nbr
Complete Templates on page 11-9).
A REA C ODE Write security: 3; Read security: 5
The local area code. Use for sending caller ID to the Network.
N BR C OMPLETE
T EMPLATES
Write security: 2; Read security: 5
Sets completed number patterns for outgoing calls so that ATLAS 550
recognizes when the phone number is complete. Fields include the index
number (#) and
P ATTERN . For example, a local number will be 7 digits long
while a long distance (1+ area code + number) will be 11 digits long. The
ATLAS 550 defaults cover almost any installation, and these templates
should not require any additional user input—except for unusual
circumstances. The template allows the use of the following wild card
inputs to define numbers:
N UMBER T YPE
T EMPLATES
Write security: 2; Read security: 5
Sets call type patterns. ISDN interfaces require that a number type be sent
over the D channel when a call is sent or received. A normal RBS trunk does
not send a type designator, but uses prefixes instead. For example, “1 +”
prefix is a national long distance call type while a “011 +” prefix is an inter-
national long distance call type. These templates form a table to permit
ATLAS 550 to translate the RBS prefix into a call type for ISDN and vice-
versa.
# Denotes an entry number. The maximum number of entries is 50. Press I to
insert a new entry and D to delete any entry.
P REFIX Sets the prefix for the number type. Only digits 0 and 1 are allowed (MAX 6).
X = Any single digit
N = Any single digit 2 through 9
911 = This specific number
[1, 2, 3...] = A single digit in this group
The ATLAS 550 default templates should cover all applications and
should not need to be added to by the user except for very rare
circumstances.