Snmp – ADTRAN Atlas 550 User Manual
Page 72
Chapter 6. System Control Terminal Menus
6-10
ATLAS 550 User Manual
61200305L1-1
E
THERNET
S
PEED
Write security: 3; Read security:5
Defines the data rate on the Ethernet interface. Choose from
10 M
BPS
or
A
UTO
10/100
. When the unit is set for
A
UTO
10/100
the ATLAS 550 auto
detects the data rate of the LAN and set itself to that rate, either
10 M
BPS
or
100 M
BPS
.
C
HAIN
P
ORT
Write security: 2; Read security: 5
Accepts input for configuring the Chain In port.
P
ORT
N
AME
Write security: 2; Read security: 5
Defines the name of the chain port. Type in an alpha-numeric name up to 57
characters long. The name can include spaces and special characters.
P
ORT
T
YPE
Write security: 2; Read security: 5
Specifies whether you use
D
IRECT
or
D
IAL
mode.
P
ORT
S
PEED
Write security: 2; Read security: 5
Specifies the baud rate of the port. Select either 2400, 9600, 19200, or 38400.
If you are using
D
IAL
for
P
ORT
T
YPE
, ensure that the
P
ORT
S
PEED
setting
matches the modem baud rate.
M
ODEM
I
NITIALIZATION
S
TRING
Write security: 2; Read security: 5
Specifies the initialization string for a modem. Refer to your modem docu-
mentation for acceptable initialization strings.
I
NITIALIZE
M
ODEM
Write security: 4; Read security: 5
Sends the Modem Initialization string to the modem. When you select this
command, the following message displays: Please verify a modem is connected
to the chain port before continuing. Confirm (y/n). Ensure that a modem is con-
nected before selecting
Y
.
F
LOW
C
ONTROL
Write security: 2; Read security: 5
Sets the flow control for the Chain In port. You may configure the Chain In
port flow control for
OFF
or
H/W
(hardware).
SNMP
Write security: 3; Read security: 5
Provides a way to configure SNMP access for the ATLAS 550. For detailed
information on SNMP, refer to SNMP Management on page 13-1. The follow-
ing options are available for review and editing:
SNMP A
CCESS
Write security: 3; Read security: 5
Defines whether SNMP access to the ATLAS 550 is enabled or disabled.
Select the appropriate option.