ADTRAN Atlas 550 - Manual (Page 129)

Chapter 9. Router
61200305L1-1 ATLAS 550 User Manual 9-15
UDP R ELAY Write security: 2; Read security:5
Configures the ATLAS 550 as a UDP (User Datagram Protocol) relay agent
to relay UDP broadcasts to a specified server IP address. UDP broadcasts
received on a given port may be relayed to, at most, one server.
E NABLED Enables/disables UDP Relay. An entry in the UDP relay table can configure
the ATLAS 550 to relay either
S TANDARD ports or up to three S PECIFIED
ports.
S TANDARD Relays the following UDP protocols: DHCP, TFTP, DNS, NTP, NBNS (Net-
BIOS Name Server), NBDG (NetBIOS DataGram), and BootP.
S PECIFIED Relays datagrams received on any of the specified ports.
R ELAY T ABLE Sets server IP addresses and UDP relay ports.
E NABLE Enables the R ELAY T ABLE . This option can also be set to D ISABLE .
IP Defines IP addresses that will receive the relay packet.
UDP P ORT 1 Specifies the UDP port to be relayed. Set to zero (0) to disable.
UDP P ORT 2 Specifies the UDP port to be relayed. Set to zero (0) to disable.
UDP P ORT 3 Specifies the UDP port to be relayed. Set to zero (0) to disable.