ADTRAN Atlas 550 - Manual (Page 76)

Chapter 6. System Control Terminal Menus
6-14 ATLAS 550 User Manual 61200305L1-1
T OTAL LCV T HRSH
The DS1 performance monitor Threshold Value for the Current 15 minute
Line Code Violations (LCV) parameter. The default value is 133,400 for an
approximate BER level of 10E-5.
E VENT L OGGING Write security: 3; Read security: 5
Sets the system event severity level threshold for each of the ATLAS 550
system event types. Whenever a system event occurs, that event is logged if
the event’s severity level is equal to or more severe than the event type’s
current threshold setting. See System Event Logging on page A-1 for detailed
information on the system events.
S YSLOG S ETUP Write security: 3; Read security: 5
Configures the ATLAS 550 Syslog client for use with a Syslog server (sup-
plied on ADTRAN/Utility disk or available on most UNIX platforms).
T RANSMISSION Enables or disables the transmission of log events to the external Syslog
server.
H OST IP
A DDRESS
Lists the IP address of the external server that is running the Syslog host dae-
mon.
H OST F ACILITY Specifies the facility destination of log events. Facilities are
located on the host and are managed by the Syslog host
daemon running on either a UNIX machine or a PC.
R EAL T IME C LOCK Write security: 3; Read security: 5
Provides access to the following two options that you can review and edit:
C URRENT T IME /
D ATE
Displays the current date and time, including sec-
onds. To edit this field, enter the time in 24-hour
format (such as 23:13:47 for 11 pm, 13 minutes and
47 seconds), and enter the date in mm-dd-yyyy format (for example,
11-08-1999).
A UTO D AYLIGHT
S AVINGS
When enabled, automatically updates the time and date when Daylight Sav-
ings Time starts and, also, when Standard Time starts.