ADTRAN Atlas 550 - Manual (Page 100)

Chapter 8. Packet Manager
8-6 ATLAS 550 User Manual 61200305L1-1
U P
PVC is up (active).
D OWN
PVC is down (inactive).
T X P CKTS
Total number of frame relay user data packets transmitted over this PVC.
R X P CKTS
Total number of frame relay user data packets received over this PVC.
S TATISTICS
Provides additional information, as follows, on the individual sublink:
BECN C OUNT
Total number of BECN bits received on this PVC.
DE D ISCARD C OUNT
Total number of Discard Eligible bits that have been received on this
PVC.
FECN C OUNT
Total number of FECN bits received on this PVC.
R ESET C OUNTERS
Resets all sublink counters.
C ONFIG Creates and configures packet endpoints.
E NDPNT N AME Write Security: 3; Read Security: 5
Simplifies configuration with user-definable names such as the name of the
frame relay provider or the circuit ID.
P ROTOCOL Write Security: 3; Read Security: 5
Defines the protocol operating on this port.
F RAME R ELAY configures this
packet endpoint to frame relay. TBOP configures this packet endpoint as
transparent bit oriented protocol.
C ONFIG Write Security: 3; Read Security: 5
Displays the configuration for this packet endpoint. This menu is protocol-
dependent. TBOP requires no configuration.
S IGNALING R OLE
Defines whether this packet endpoint acts as the network or user side of the
UNI or as an NNI.
One HDLC resource is used by each PRI or each Packet Endpoint.