ADTRAN Atlas 550 - Manual (Page 105)

Chapter 8. Packet Manager
61200305L1-1 ATLAS 550 User Manual 8-11
U SAGE Read Security: 5
This field displays a 7-character summary of the references to this link.
Each character can be a dash (-), or it can be a character indicating the
resource represented by the character position (see Table 8-2 on page 8-11).
T EST Provides menus for controlling test options for packet endpoints.
E NDPNT N AME Read Security: 5
Displays the name of the packet endpoint.
P ROTOCOL Read Security: 5
Displays the protocol running on this packet endpoint.
S UBLINK Write Security: 3; Read Security: 5
Displays test menus for the packet endpoint sublinks. The menus vary
depending on the protocol. Testing is not supported on TBOP.
N AME
User-defined name for the DLCI.
DLCI
Local address for each PVC as assigned by the carrier.
T EST
Shows the test mode for this PVC.
Table 8-2. Usage Characters
Character Description
1 Packet connection in the first dedicated connections map.
2 Packet connection in the second dedicated connections map.
3 Packet connection in the third dedicated connections map.
4 Packet connection in the fourth dedicated connections map.
5 Packet connection in the fifth dedicated connections map.
s Switched packet connection in the dial plan.
u Used by one or more packet switch connections or packet voice
entries.
Packet voice entries are in either the D EDICATED M APS or the
D IAL P LAN .