Router examples, Appendix d, Frame relay network – ADTRAN Atlas 550 User Manual
Page 231
61200305L1-1
ATLAS 550 User Manual
D-1
Appendix D
Router Examples
This appendix provides step-by-step instructions for configuring your
ATLAS 550 internal router. Figure D-1 illustrates an ATLAS 550 using the
internal router.
Figure D-1. ATLAS 550 Configured for the Router Option
The general procedure for configuring the ATLAS 550 depicted in Figure D-
1 is as follows:
1.
From
P
ACKET
M
ANAGER
/P
ACKET
E
NDPNTS
/C
ONFIG
, create the frame
relay packet endpoint. Refer to the Frame Relay User Manual for more
information.
2.
From
P
ACKET
M
ANAGER
/P
ACKET
E
NDPNTS
/C
ONFIG
/S
UBLINKS
, create the
necessary PVCs.
3.
From
P
ACKET
M
ANAGER
/P
ACKET
C
NCTS
, connect the frame relay end-
point to the Router.
4.
From
D
EDICATED
M
AP
, connect the frame relay packet endpoint to the
appropriate physical interface.
5.
From
R
OUTER
/IP/I
NTERFACES
, enable routing on the interface.
6.
(Optional) Configure any static routes that might be required.
Frame Relay
Network
IP
Ethernet
Router
Pkt
Endpoint 1
T1
Port
10.100.20.0
ATLAS 550