Allied Telesis AT-S63 - Manual (Page 858)

Appendix A: AT-S63 Management Software Default Settings
858
802.1x Port-Based Network Access Control Default Settings
The following table describes the 802.1x Port-based Network Access
Control default settings.
The following table lists the default settings for RADIUS accounting.
802.1x Port-based Network Access
Control Settings
Default
Port Access Control Disabled
Authentication Method RADIUS EAP
Port Role None
RADIUS Accounting Settings Default
Status Disabled
Port 1813
Type Network
Trigger Type Start_Stop
Update Status Disabled
Update Interval 60