Allied Telesis AT-S63 - Manual (Page 398)

Chapter 19: IGMP Snooping
398 Section III: IGMP Snooping, MLD Snooping, and RRP Snooping
Displaying a List of Host Nodes
You can use the AT-S63 management software to display a list of the
multicast groups on a switch, as well as the host nodes. To display the list,
perform the following procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 137 on page
394
2. From the Advanced Configuration menu, type 2 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration menu is shown in Figure 138 on
page 395.
3. From the IGMP Snooping Configuration menu, type 6 to select View
IGMP Multicast Hosts List.
The View IGMP Multicast Host List menu is shown in Figure 139.
Figure 139. View IGMP Multicast Hosts List Menu
The View IGMP Multicast Hosts List menu displays a table with the
following columns of information:
Multicast Group
The multicast address of the group.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
View IGMP Multicast Hosts List
Number of IGMP Multicast Groups: 4
VLAN Port/ IGMP Exp.
MulticastGroup ID TrunkID HostIP Ver Time
------------------------------------------------------------
01:00:5E:00:01:01 1 6/- 172.16.10.51 v2 21
01:00:5E:7F:FF:FA 1 5/- 149.35.200.75 v2 11
149.35.200.65 v2 65
01:00:5E:00:00:02 1 17/- 149.35.200.69 v2 34
01:00:5E:00:00:09 1 14/- 172.16.10.51 v2 32
U - Update Display
R - Return to Previous Menu
Enter your selection?