Allied Telesis AT-S63 - Manual (Page 124)

Chapter 6: Port Parameters
124 Section I: Basic Operations
The following prompt is displayed:
Enter the Rate Limit (packets/second):[0 to 262143]->
7. Enter a number for the rate limit.
8. Type 3 to toggle Multicast Rate Limiting Status between Enabled and
Disabled.
9. Type 2 to select Multicast Rate.
The following prompt is displayed:
Enter the Rate Limit (packets/second):[0 to 262143]->
10. Enter a number for the rate limit.
11. Type 3 to toggle Multicast Rate Limiting Status between Enabled and
Disabled.
12. Type 4 to select Multicast Rate.
The following prompt is displayed:
Enter the Rate Limit (packets/second):[0 to 262143]->
13. Enter a number for the rate limit.
14. Type 5 to toggle Broadcast Rate Limit Status between Enabled and
Disabled.
15. Type 6 to select Broadcast Rate.
The following prompt is displayed:
Enter the Rate Limit (packets/second):[0 to 263143]->
16. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.