Allied Telesis AT-S63 - Manual (Page 853)

853
Appendix A
AT-S63 Management Software Default
Settings
This appendix lists the factory default settings for the AT-S63 management
software. It contains the following sections in alphabetical order:
ˆ “Boot Configuration File Default Setting” on page 855
ˆ “Class of Service” on page 856
ˆ “Denial of Service Prevention Default Settings” on page 857
ˆ “802.1x Port-Based Network Access Control Default Settings” on
page 858
ˆ “Enhanced Stacking Default Setting” on page 859
ˆ “Event Log Default Settings” on page 860
ˆ “GVRP Default Settings” on page 861
ˆ “IGMP Snooping Default Settings” on page 862
ˆ “IP Default Settings” on page 863
ˆ “MAC Address-based Port Security Default Settings” on page 864
ˆ “MAC Address Table Default Setting” on page 865
ˆ “Management Access Control List Default Setting” on page 866
ˆ “Manager and Operator Account Default Settings” on page 867
ˆ “MLD Snooping Default Settings” on page 868
ˆ “Networking Stack Default Setting” on page 869
ˆ “PKI Default Settings” on page 870
ˆ “Port Configuration Default Settings” on page 871
ˆ “RJ-45 Serial Terminal Port Default Settings” on page 872
ˆ “RRP Snooping Default Setting” on page 873
ˆ “Server-based Authentication (RADIUS and TACACS+) Default
Settings” on page 874
ˆ “SNMP Default Settings” on page 875
ˆ “SNTP Default Settings” on page 876
ˆ “Spanning Tree (STP, RSTP, and MSTP) Default Settings” on page 877
ˆ “SSH Default Settings” on page 879
ˆ “SSL Default Settings” on page 880