Allied Telesis AT-S63 - Manual (Page 263)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 263
The Event Log menu is shown in Figure 77.
Figure 77. Event Log Menu
3. To enable or disable event logging, type 1 to toggle Event Logging
between the two options:
Enabled
The switch immediately begins to add events to the logs and send
events to any defined syslog servers. This is the default.
Disabled
The switch does not store events in the logs and does not send events
to any syslog servers.
Note
You cannot individually disable or enable the temporary and
permanent event logs.
Note
When the event log feature is disabled and the switch is rebooted,
initialization events are still stored in the logs.
4. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
To display the events in a log, go to the next procedure.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Event Log
1 - Event Logging .......... Enabled
2 - Display Output ......... Temporary (Memory)
3 - Display Order .......... Chronological
4 - Display Mode ........... Normal
5 - Display Severity ....... E, W, I
6 - Display Module ......... All
C - Clear Log
L - Configure Log Outputs
S - Save Log to File
V - View Log
R - Return to Previous Menu
Enter your selection?