Allied Telesis AT-S63 - Manual (Page 212)

Chapter 11: File System
212 Section II: Advanced Operations
6. Do one of the following:
ˆ To reconfigure the switch using the parameter settings in the newly
selected active boot configuration file, reset or power cycle the
switch. For instructions, refer to “Rebooting a Switch” on page 61.
ˆ To overwrite the settings in the configuration file with the switch’s
current settings, return to the Main Menu and type S to select Save
Configuration Changes.
Viewing a Boot
Configuration
File
Use the following procedure to view the contents of a boot configuration
file. (To display the names of the boot configuration files on the switch, see
“Displaying System Files” on page 220.)
To view the contents of a boot configuration file, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown Figure 4 on page 54.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 61.
3. From the System Utilities menu, type 1 to select File Operations.
The File Operations menu is shown in Figure 61 on page 208.
4. From the File Operations menu, type 7 to select View File.
The following prompt is displayed:
Enter file name:
5. Enter the name of the boot configuration file you want to view.