Allied Telesis AT-S63 - Manual (Page 190)

Chapter 10: Networking Stack
190 Section I: Basic Operations
The Display ARP Table menu is shown in Figure 56.
Figure 56. Display ARP Table Menu
The Display ARP Table menu displays a table that contains the
following columns of information: The information in this table is for
viewing purposes only.
Interface
The network interface of a table entry. The switch has two network
interfaces. The “loopback” designation represents the interface used
by the switch for internal diagnostics. The “eth0” designation
represents the Ethernet network interface.
IP Address and
MAC Address
The IP addresses and their corresponding MAC addresses.
Type
The type of ARP entry. An entry can be permanent, meaning it can
never be deleted from the table, or temporary. Only the “loopback”
entry is permanent. All “eth0” entries are temporary.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display ARP Table
Interface IP Address MAC Address Type
---------------------------------------------------------
loopback
127.0.0.1 00:00:00:00:00:00 PERMANENT
eth0 149.22.22.22 00:30:84:32:8A:5B TEMPORARY
eth0 149.22.22.1 00:30:84:32:12:42 TEMPORARY
eth0 149.22.22.101 00:30:84:32:8A:1B TEMPORARY
eth0 149.22.22.27 00:30:84:32:6A:11 TEMPORARY
eth0 149.22.22.86 00:30:84:32:81:22 TEMPORARY
U - Update Display
R - Return to Previous Menu
Enter your selection?